Elegant Themes Slider

Stylish motif slider control

The sliders can be placed anywhere and cover the entire width of the column structure. Featured Post Slider is a large slider designed to highlight your best or latest posts. This is how you attach a slider module to your page

The slider controls can be placed anywhere and cover the entire width of the respective pillar structures. Multi-slider supports parallel and camcorder wallpapers! In order to be able to add a slider to your page, you must first go to the divi builder. As soon as the Divi themes are placed on your website, you will see a Use divi builders icon above the mail editors every new page you create.

When you click on this icon, the DiviBuilder is enabled so that you have full control over all DiviBuilder components. Then click the Use Used Viewer to start the Viewer in Viewer mode. If you are signed in to your WordPress Dashboard, you can also click the Use the Visual Builder pushbutton when you search your Web site at the frontend.

As soon as you have called the Visual builder, you can click on the grey plus key to insert a new modul to your page. Find the slider modul in the lists of moduls and click on it to attach it to your page. You can search the modulist, i.e. you can also insert the slider and click hit return to find and append the slider modul automatic!

Sliders are a great way to present your products or services. In this example, I will be adding a slider to present some functions of the products. Every transparency has a wallpaper picture, a transparency picture and a contents area. Then, paste a slider into your new line.

On the Contents page of the Slider Preferences, click + Insert New Element to make your first transparency. Refresh the following items in the slides preferences for your first slide: Hint: By default, you will see the slideshow on the right side and the slider text contents and buttons on the right side.

Wallpaper color: rgba(0,0,0,0,0,0,0. 2) *This color slightly obscures the wallpaper to make the text more legible. Copy the newly generated transparency and refresh it with new contents if necessary. Do the same for all transparencies you want to include. In this example, I only include two foils, but the end effect is a good-looking foil that fits the website theme, presents your products efficiently, and encourages the users to click the information buttons for more information about the products.

Select whether or not you want to show the circular buttons/sliding indicator at the bottom of the slider. The name of the modul is changed in the buililder for simple identifying. You can find all of the module's style choices, such as font styles, color, size, and distance, on the Styles page.

It is the tabs on which you can modify the appearance of your modules. Each Divi has a long history of theme options that let you modify almost anything. The slider displays an inner shade by default. 3. If you activate this checkbox, your wallpapers will have a fix location when scrolling.

If you want to modify the style of your heading, select the style from the drop-down list. You can resize your head text here. Or you can enter the text you want to resize directly into the edit box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. When you want to modify the colour of your head text, use this setting to select the colour you want from the colour selection. The distance between the letters influences the distance between the individual letters.

When you want to enlarge the distance between the individual letters in your heading, use the area slider to set the distance, or enter your preferred distance value in the box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

If you want to make the distance between the individual lines larger, use the area slider to set the distance or enter your preferred distance value in the box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

Changing the fonts of your continuous text can be done by choosing the required fonts from the drop-down list. You can resize your text here. Or you can enter the text you want to resize directly into the edit box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. When you want to modify the colour of your continuous text, use this menu item to select the colour you want from the colour selection. The distance between the letters influences the distance between the individual letters.

When you want to enlarge the distance between the letters in your text, use the area slider to set the distance, or enter your preferred distance value in the box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

If you want to make the distance between the lines larger, use the area slider to set the distance, or enter your preferred distance value in the box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

These settings control the area between the top of the unit and the text inside the unit. To enlarge or shrink this area, type your preferred value here. In order to e.g. minimize the controller's overall dimensions, you can set a value of 100px.

These settings control the interior between the bottom of the unit and the text inside the unit. To enlarge or shrink this area, type your preferred value here. In order to e.g. minimize the controller's overall dimensions, you can set a value of 100px.

If you enable this item, you will see various custom buttons that you can use to modify the look of your module's Buttons. You can use this preference to increment or decrement the text inside the buttons. It is scaled when the text sizes are incremented and decremented.

As standard, the icons take on the accented colour of your design as specified in the Customize them Theme dialog. Allows you to apply a customized text colour to the icon in this tool. Choose your customized colour with the Colour Selector to modify the colour of the icon. Standard icons have a translucent wallpaper colour.

You can change this by selecting the required wallpaper colour from the colour selection. You can enlarge or reduce this margin with this adjustment. You can remove outlines by entering a value of 0. By default, key outlines take on the highlight colour of your design as specified in the Topic Customizer.

Allows you to set a user-defined frame colour for the icon in this part. Choose your customized colour with the Colour Selector to modify the edge colour of the icon. This value can be reduced to 0 to make a quadratic badge, or significantly increased to make badges with rounded corners.

The distance between the letters influences the distance between the individual letters. When you want to enlarge the distance between the individual letters in your circuit text, use the area slider to set the distance, or enter your preferred distance value in the entry box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

If you want to modify the text of your buttons, select the required text from the drop-down list. If this option is deactivated, symbols will be removed from your buttons. When Symbols are activated, you can use this option to select which symbol should be used on your Buttons. Changing this option changes the colour of the symbol that will appear on your toolbar.

In the standard version, the symbol colour corresponds to the text colour of your keys, but with this option you can change the colour separately. Select whether to show your key symbol on the right or right side of your key. Normally, toolbar symbols are only shown when hovering.

If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup. If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup.

If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup. This value is used when the user moves the icon over it with the cursor. This value is used when the user moves the icon over it with the cursor.

It is also possible to assign user-defined styles and tags to the modules, allowing you to modify the modules in the way your sub themes look. bss files. Create more than one class delimited by a blank. You can use these categories in your Divi Kind themes or within the customized HTML pages that you create on your page or website using Divi themes options or Divi Builder page settings.

In the section Customizing style sheets you will find a text box in which you can directly customize each item with a customized type sheet. Your entries in these preferences are already packaged in styles, so you only need to type styles seperated by semi-colons. To have the slider move without the user having to click the Next pushbutton, select this item and change the RPM below if necessary.

Allows you to control how quickly the slider between slides will fade when the'Auto Animation' checkbox is checked at the top. And as the display sizes on portable equipment shrink, the display area becomes more and more valuable. It is sometimes a good suggestion to deactivate some less important slider items to make the slider smaller and more legible.

If you activate this option, the text contents of the slider on the phone will be hidden. And as the display sizes on portable equipment shrink, the display area becomes more and more valuable. It is sometimes a good suggestion to deactivate some less important slider items to make the slider smaller and more legible.

If you activate this option, the slider keys on the phone will disappear. And as the display sizes on portable equipment shrink, the display area becomes more and more valuable. It is sometimes a good suggestion to deactivate some less important slider items to make the slider smaller and more legible.

If you enable this option, slideshows and video will be displayed on your phone (they are turned off by default). Here you can specify the text for the slider head. When you want to show a pushbutton under your slider contents, type the text of the pushbutton here. If you do not want to show a pushbutton, please do not fill in this field.

Please type in the contents of your slider. Notice that the amount of text you type here determines the amount of your transparencies. When you view a pushbutton, paste a legitimate Web URL into this box to specify the target reference. Each time you attach a slideshow picture, it appears to the right of your slideshow text above the slideshow wallpaper.

Failure to specify a slideshow will result in a centred, text-based slideshow. And because the text determines the amount of each transparency, your slideshow will fall under the bottom of the transparency when large enough to create a bottom-aligned one. An example can be found on the third foil on this page.

Notice that the heigth of a slideshow with a slideshow could be defined by a higher slider in the slider, so make sure that your slideshow is large enough to take if you want a down-aligned one. Due to readability considerations, transparency pictures are only displayed in slider controls located in the www. slider.com or www. slider.com columns or in 1 widths.

In addition, slides are not displayed with a width of less than 768 pixel. Breadths of the slides are below specified. It is recommended that your slides are at least as broad. Each time you attach a slideshow, it appears to the right of your slideshow text above your slideshow wallpaper.

Failure to specify a slideshow will result in a centred, text-based slideshow. And because the text determines the amount of each transparency, your slideshow will fall under the bottom of the transparency when large enough to create a bottom-aligned one. An example can be found on the third foil on this page.

Once specified, this picture will be used as the backdrop for this part. In order to erase a wallpaper, just erase the link from the preferences area. Size of a transparency is controlled by the amount of text it contains. When you have more than one transparency, the slider assumes the highest transparency heights.

Width of your slider is defined by the width of your web page. Normally, wallpapers are shown in the middle of the transparency. Allows you to move the position up, down, link, leave, right, or one of the four edges of the film. Backgrounds are enlarged proportionately by default to make sure they fill the whole thumbnail.

You can use this setting to modify the standard behaviour. "Covers" is the standard behaviour that scales the picture to span the whole film area. "Adjust " also forces the picture to span the whole area, but forces the picture width and width to be adjusted to the slider width and width.

"Real Size" does not resize the picture at all and displays it in its original dimensions. When you want to use a single colour for your slides, use the colour selector to select a colour for the backgrounds. Therefore, you should create both a wallpaper and a wallpaper movie for best results.

Therefore, you should create both a wallpaper and a wallpaper movie for best results. To dimension your movie properly, you need to enter the width (in pixels) of your movie here. To dimension your movie properly, you must enter the precise pixel altitude of your movie here.

If this option is checked, a user-defined blend colour is added above the wallpaper and behind the contents of the slider. You can use the Select Colors function to select a foreground layer colour. If activated, a wallpaper colour is added behind the slider text to make it easier to read on wallpapers. You can use colour selection to select a colour for the text overlap.

If you hover the mouse over a slider modul, you will see an arrow that allows the user to browse through each film. As standard, these arrowheads come into the background text colour of the film. You can, however, use this option to set a user-defined colour for these arrowheads. Inside each slider, point navigational items appear below the slider area.

Those controls allow the operator to scroll through the slider. It is possible to specify a customized colour to be used for these panels by using the colour selector in this preference. Adjusts the orientation of your slideshow horizontally or vertically. 4. You can have your picture either centred horizontally or centred on the underside of your film.

When your slide background is black, the text color should be bright. Conversely, if the slide background is bright, the text color should be changed to 'Dark'. If you want to modify the style of your heading, select the style from the drop-down list. You can resize your head text here.

Or you can enter the text you want to resize directly into the edit box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

When you want to modify the colour of your head text, use this setting to select the colour you want from the colour selection. The distance between the letters influences the distance between the individual letters. When you want to enlarge the distance between the individual letters in your heading, use the area slider to set the distance, or type your preferred distance value in the box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. If you want to make the distance between each line larger, use the area slider to set the distance, or enter your preferred distance value in the box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. Changing the fonts of your continuous text can be done by choosing the required fonts from the drop-down list. You can resize your text here.

Or you can enter the text you want to resize directly into the edit box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

When you want to modify the colour of your continuous text, use this menu item to select the colour you want from the colour selection. The distance between the letters influences the distance between the individual letters. When you want to enlarge the distance between the letters in your text, use the area slider to set the distance, or type your preferred distance value in the box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. If you want to make the distance between the lines larger, use the area slider to set the distance, or enter your preferred distance value in the box to the right of the slider.

Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used. If you enable this item, you will see various custom buttons that you can use to modify the look of your module's Buttons. You can use this preference to increment or decrement the text inside the buttons.

It is scaled when the text sizes are incremented and decremented. As standard, the icons take on the accented colour of your design as specified in the Customize them Theme. Allows you to apply a customized text colour to the icon in this tool. Choose your customized colour with the Colour Selector to modify the colour of the icon.

Standard icons have a translucent wallpaper colour. You can change this by selecting the required wallpaper colour from the colour selection. You can enlarge or reduce this margin with this adjustment. You can remove outlines by entering a value of 0. By default, key outlines take on the highlight colour of your design as specified in the Topic Customizer.

Allows you to set a user-defined frame colour for the icon in this part. Choose your customized colour with the Colour Selector to modify the edge colour of the icon. This value can be reduced to 0 to make a quadratic badge, or significantly increased to make badges with rounded corners.

The distance between the letters influences the distance between the individual letters. When you want to enlarge the distance between the individual letters in your circuit text, use the area slider to set the distance, or enter your preferred distance value in the entry box to the right of the slider. Inputs boxes support various measuring devices, i.e. you can enter "px" or "em" according to your value to modify the device used.

If you want to modify the text of your buttons, select the required text from the drop-down list. If this option is deactivated, symbols will be removed from your buttons. When Symbols are activated, you can use this option to select which symbol should be used on your Buttons. Changing this option changes the colour of the symbol that will appear on your toolbar.

In the standard version, the symbol colour corresponds to the text colour of your keys, but with this option you can change the colour separately. Select whether to show your key symbol on the right or right side of your key. Normally, toolbar symbols are only shown when hovering.

If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup. If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup.

If you move the icon over it with a visitor's cursor, this colour is used. Colors change from the basic colors specified in the preceding setup. This value is used when the user moves the icon over it with the cursor. This value is used when the user moves the icon over it with the cursor.

In the section CustomizingCSS you will find a text box where you can directly customize each item. Your entries in these preferences are already packaged in styles, so you only need to type styles seperated by semi-colons.

Auch interessant

Mehr zum Thema