Google Bridge

Bridge

This bridge was installed as part of the wider Gordon House equipment for Google, also carried out by Reddy A+U. Bridging Modes - Google Wifi Help For those who do, we've listed some suggested set-ups below, but most folks won't need a bridge between them. What time you should use bridge mode: The bridge modus is only needed if there are special cases of NAT doubles. In most cases, NAT does not influence Wi-Fi throughput. Find out more about Dual NAT and when you need bridge mod.

Do Google Wifi supports bridge modes? Yes, but it only works if you use a Wifi point. When you create a meshed net with more than one wireless point, your primary wireless point must not be in bridge state. The reason for this is that the primary Wifi point needs to do specific things to manage your wireless LAN setup and communications.

When it is in bridge modus, you loose some of the most important functions of Google Wifi. Can I activate the bridge modus? There are two ways to do this if you're using a Google Wifi point and you' re having trouble with NAT: Best way to duplicate NAT is to activate bridge on your modem/router combination.

Login to your local computer or modem/router combination and find its preferences to activate bridge state. Please note: Bridge only works if you are using a standalone Google Wifi point. When you create a meshed net with more than one wireless point, your primary wireless point must not be in bridge state. Although all extra WLAN points are always in bridge fashion by default, we do not advise turning your primary WLAN point into a bridge.

The reason for this is that the primary Wifi point needs to do specific things to manage your wireless LAN setup and communications. When it is in bridge modus, you loose some of the features of Google Wifi: In addition, Bridge deactivates many of Google Wifi's safeguards. The reason for this is that your host routing (the modem/router combination in the above scenario) is the one that performs DNA tuning, package checking, patch execution, and so on.

The Google Wifi automated safety update feature maximises your private sphere and safety. It' protection is most efficient - and in some cases only efficient - when all your data transfer goes through your primary WLAN point (instead of another router). When you have a third-party provider that routers, you can connect a primary wireless point to it and then "network" more wireless points downstream.

Do you still want to turn your main WLAN point into a bridge? Launch the Google Wifi application. Touch the Preferences page, then touch Network and General. Touch Extended connectivity > Equipment modes > Your WLAN point > Bridge modes. If your WAN IP is a private IP location, you cannot put your Wifi Point into bridge state.

In order to activate bridge modus, there must be another round robin between your modems and your Wifi-Point. When the WAN of your Wifi point has a IP, i.e. it is directly linked to your modems. The Bridging method is not available in the application in this case.

Launch the Google Wifi application. Touch the Preferences page, then touch Networks and General. Touch Extended connectivity > Equipment modes > Your WLAN point > NAT modes (default). If you connect two rockers, you can expand the Wi-Fi cover in your home. However, if you have two routers each with its own Wi-Fi home Wi-Fi connection, your home appliances may have difficulty interacting with each other.

Describes this situation as the double NAT situation. When you have two Wi-Fi backbones, it's possible that your computer is on one backbones while your computer is on the other. The Bridge eliminates this by allowing more than one router to access a Wi-Fi shared workstation. However, NAT is not necessarily a big issue. In most cases, NAT does not influence Wi-Fi throughput.

Find out more about NAT twice.

Mehr zum Thema