Real Time Clock

real-time clock

An RTC is a computer clock that tracks the current time. An RTC is an IC that keeps the current time in microprocessors and systems up to date and contains second or minute interrupt outputs. Power consumption, as expected, is a key factor in most real-time clock designs, in addition to accuracy, robustness and small package size. We offer a wide range of small, fully featured real-time clocks that offer high accuracy and low power consumption for a variety of end applications.

sspan class="mw-headline" id="Terminologie">Terminologie[edit]

Clock (. 1387 ) Real time clock from an older computer. An RTC is a computer clock (usually in the shape of an integral circuit) that tracks the time. Even though the concept often applies to equipment in PCs, server and on-board environments, almost every electronics appliance has an RTC that needs an exact time.

Real time clock is used to prevent mix-ups with conventional hardlocks, which are only a signal that controls the electronic circuitry and do not measure time in terms of people. The RTC should not be mistaken for real-time computer, which divides its three-digit abbreviation but does not directly refer to the time of night.

Even though the storage time can be without a RTC, the[1] use of such a system has advantages: To reduce its start time, a GPRS tuner can compare the actual time according to its RTC with the time at which it last had a good time. The majority of RTTCs use a quartz oscillator,[7][8], but some have the ability to use the mains voltage for this.

9 ] In many cases the oszillator is 32Hz. 7 ] This is the same repetition interval used in crystal timepieces, and for the same reason, namely that the repetition interval is exactly 215 times per second, is a comfortable repetition interval used in basic logic counting circuitry. A few controllers have a built-in real-time clock, usually only those with many other functions and peripheral devices.

A number of today's computer users are receiving watch information via electronic radios and using it to encourage time standard. The majority of mobile communication logs (e.g. LTE) directly deliver the actual time. A computer can use the Netzwerkzeitprotokoll if an internet radio is available. Computer that are used as time server may use GPS [13] or ultra-low frequencies wireless communications transmitted by a standardization body (i.e. a clock[14]).

Several older computer designers such as Novas and PDP-8s[15] used a real-time clock that is characterized by high precision, ease of use, versatility and low costs. This way it can deploy a complete clock and calender. You must adjust a software-based clock each time you turn on your computer. By the time the web became an everyday occurrence, networking time logs were used to adjust such watchesutomatically.

This RTC works in Europe, North America and some other networks because the AC grid is set to have a long-term precision equivalent to that of the country's default timekeepers. This means that in these networks this RTC is better than crystal watches and cheaper. The RTC cannot be used in mobile computing or networks (e.g. in South Asia) that do not control the AC grid frequencies.

Even without having your own computer connected to the world wide web, setting the clock can be uncomfortable. Several mainboards are manufactured without real-time watches. Real-time watches are not needed either because of the wish to conserve time ( as in Raspberry Pi's system architecture) or because they may not be needed at all ( as in Arduino's system architecture).

"PIC Mikrocontroller Real-Time Real-Time Pulse Generator SOURCecode Project". Bounced 2007-08-23. Returned on June 20, 2013. High-precision real-time clocks. Brought back on October 20, 2017. Chipmatch Atomic Clock. Brought back on October 20, 2017. Bounced 2007-08-23. GPS clock synchronization. Brought back on October 20, 2017. Radio controlled clock USB". Brought back on October 20, 2017.

Digital Equipment Corp. Returned on November 12, 2016.

Mehr zum Thema